Question Library
Browse, filter, and study verified past examination questions with step-by-step mathematical reasoning.
Searching 18,000+ Questions...
Sifting topics, KaTeX formulas & verified solutions
Showing 22096–22110 of 29811 verified questions
Sort by:
Physics
UTME / JAMB 1995
Current Electricity & Electric Circuits
Solution
A rectangular metal block of volume 10\(^{-6}\)m\(^3\) at 273k is heated to 573k. If its coefficient of linear expansion is 1.2 x 10\(^{-5}\)k\(^{-1}\), the percentage change of it volume is
A
1.5%
B
1.1%
C
0.4%
D
0.1%
medium Difficulty
Verified Correct Answer: Option B
Physical Principles & Numerical Solution
Y = \(\frac{\Delta V}{V \times \Delta \theta}\)
3 x 10-5 x 1.2 = \(\frac{\Delta\ V}{10^{-6}\times\ (573 - 273)}\)
\(\Delta\)V = 1.080 x 10\(^{-7}\)m\(^3\)
%\(\Delta\)V = \(\frac{1.080 \times\ 10^{-7}}{10^{-6}}\) x 100
= 1.08%
\(\approx\) = 1.1%
Source: Myschool Past Questions Archive (Record #27793)
Physics
UTME / JAMB 1995
Equilibrium of Forces, Moments & Flotation
A piece of wood floats inside water at room temperature with a fraction of it above the liquid surface. As the temperature of the water is raised, the part of the wood above the liquid will
A
decrease because the density of water decreases with temperature
B
increase because the density of water decreases with temperature
C
decreases because the density of water increases with water temperature
D
increase because the density of water increases with temperature
medium Difficulty
Verified Correct Answer: Option A
Physical Principles & Numerical Solution
No expanded working has been attached for this question yet. The verified answer is Option A.
Source: Myschool Past Questions Archive (Record #27804)
Physics
UTME / JAMB 1995
Gas Laws & Heat Transfer
Solution
The equation PxVyTz = constant in charles' law when
A
x = 1, y = -1, z = 1
B
x = 0, y = 1, z = -1
C
x = 1, y = 0, z = -1
D
x = 0, y = 1, z = 1
medium Difficulty
Verified Correct Answer: Option B
Physical Principles & Numerical Solution
According to Charles' law, the volume of a given mass of gas is directly proportional to its absolute temperature at constant pressure.
Source: Myschool Past Questions Archive (Record #27807)
Physics
UTME / JAMB 1995
Calorimetry, Latent Heat & Change of State
Solution
An electric kettle with negligible heat capacity is rated at 2000W. If 2.0kg of water is put in it, how long will it take the temperature of water to rise from 20OC to 100OC? [specific heat capacity of water = 4200Jkg-1k-1]
A
420S
B
336S
C
168S
D
48S
medium Difficulty
Verified Correct Answer: Option B
Physical Principles & Numerical Solution
Heat energy = Elect. energy
mc\(\theta\) = power x time
2 x 4200 x (100 - 20) = 2000 x t
t = 336s
Source: Myschool Past Questions Archive (Record #27810)
Physics
UTME / JAMB 1995
Temperature, Thermometry & Thermal Expansion
Solution
A temperature scale has a lower fixed point of 40mm and a upper fixed point of 200mm. What is the reading on this scale when a thermometer reads 60oC?
A
33.3mm
B
36.0mm
C
96.0mm
D
136.0mm
medium Difficulty
Verified Correct Answer: Option D
Physical Principles & Numerical Solution
200mm ..... 100oC
Xmm ..... 60oC
400mm ..... 0oC
\(\frac{x - 40}{200 - 40}\) = \(\frac{60 - 0}{100 - 0}\)
X = 136mm
Source: Myschool Past Questions Archive (Record #27815)
Physics
UTME / JAMB 1995
Calorimetry, Latent Heat & Change of State
A quantity of ice at 10oC is heated until the temperature of the heating vessel is 90oC. Which of the following constants is NOT required to determine the quantity of heat supplied to the vessel?
A
specific heat capacity of ice
B
specific heat capacity of water
C
specific latent heat of fusion
D
specific latent heat of vaporization
medium Difficulty
Verified Correct Answer: Option D
Physical Principles & Numerical Solution
No expanded working has been attached for this question yet. The verified answer is Option D.
Source: Myschool Past Questions Archive (Record #27821)
Physics
UTME / JAMB 1995
Calorimetry, Latent Heat & Change of State
Which of the following statements give the TRUE difference between evaporation and boiling? i. Evaporation occurs at all temperatures while boiling occurs at a fixed temperature for a given pressure. ii. Evaporation is a surface phenomenon while boiling is an interior phenomenon. iii. Evaporation is affected by surface area while boiling is not.
A
i and ii only
B
i and iii only
C
ii and iii only
D
i, ii, iii.
medium Difficulty
Verified Correct Answer: Option D
Physical Principles & Numerical Solution
No expanded working has been attached for this question yet. The verified answer is Option D.
Source: Myschool Past Questions Archive (Record #27827)
Physics
UTME / JAMB 1995
Current Electricity & Electric Circuits
Solution
A well-lagged bar of length 100cm has its ends maintained at 100oC and 40oC respectively. What is the temperature at a point 60cm from the hotter end?
A
58oC
B
62oC
C
64oC
D
76oC
medium Difficulty
Verified Correct Answer: Option C
Physical Principles & Numerical Solution
In a well-lagged bar at steady state, temperature decreases linearly with distance
Temperature gradient = \(\frac{\Delta T}{\text{L}}\)
= \(\frac{100 - 40}{100}\) = 0.6º C/cm
Temperature drops at 60cm = 0.6 x 60 = 36º C
Final temperature = 100ºC - 36ºC = 64ºC
Source: Myschool Past Questions Archive (Record #27835)
Physics
UTME / JAMB 1995
Waves, Sound & Vibrations
Solution
Which of the following is the exclusive property of a transverse wave?
A
diffraction
B
refraction
C
compression
D
polarization
medium Difficulty
Verified Correct Answer: Option D
Physical Principles & Numerical Solution
Transverse waves oscillate at right angles to the direction of wave propagation, which enables the phenomenon of polarization.
Source: Myschool Past Questions Archive (Record #27836)
Physics
UTME / JAMB 1995
Waves, Sound & Vibrations
Solution
The wavelength of signals from a radio transmitter is 1500mm and the frequency is 200kHz. What is the wavelength for a transmitter operating at 100kHz?
A
7500m
B
300m
C
75m
D
15m
medium Difficulty
Verified Correct Answer: Option B
Physical Principles & Numerical Solution
\(\lambda\)1F1 = \(\lambda\)2F2
1500 x 200000 = 1000000 x \(\lambda\)2
\(\lambda\)2 = 300m
Source: Myschool Past Questions Archive (Record #27837)
Physics
UTME / JAMB 1995
Current Electricity & Electric Circuits
The difference between sound waves and light waves is that sound waves
A
are transverse while light waves are longitudinal
B
require a medium to travel while light waves does not
C
can be diffracted but light waves cannot
D
cannot be reflected but light waves can
medium Difficulty
Verified Correct Answer: Option B
Physical Principles & Numerical Solution
No expanded working has been attached for this question yet. The verified answer is Option B.
Source: Myschool Past Questions Archive (Record #27838)
Physics
UTME / JAMB 1995
Waves, Sound & Vibrations
Solution
The pitch of an acoustic device can be increased by
A
increasing the frequency
B
increasing the amplitude
C
decreasing the loudness
D
decreasing the intensity
medium Difficulty
Verified Correct Answer: Option A
Physical Principles & Numerical Solution
Increasing the frequency of a sound wave raises its pitch. The amplitude affects the loudness, but not the pitch.
Source: Myschool Past Questions Archive (Record #27839)
Physics
UTME / JAMB 1995
Current Electricity & Electric Circuits
Total eclipse of the sun occurs when the
A
earth is between the moon and the sun
B
sun is between the moon and the earth
C
moon is between the sun and the earth
D
ozone layer is threatened
medium Difficulty
Verified Correct Answer: Option C
Physical Principles & Numerical Solution
No expanded working has been attached for this question yet. The verified answer is Option C.
Source: Myschool Past Questions Archive (Record #27840)
Physics
UTME / JAMB 1995
Reflection, Refraction & Dispersion of Light
Solution
What is the approximate critical angle for total internal reflection for diamond if the refractive index of diamond is 2.42?
A
21o
B
22o
C
23o
D
24o
medium Difficulty
Verified Correct Answer: Option D
Physical Principles & Numerical Solution
SinC = \(\frac{1}{n}\)V2
SinC = \(\frac{1}{2.42}\)
SinC =24o
Source: Myschool Past Questions Archive (Record #27841)
Physics
UTME / JAMB 1995
Lenses & Optical Instruments
Solution
A real object is placed at a distance ucm in front of a curved mirror of focal length fcm. If the image is upright and magnified, then the mirror is
A
convex and u =2f
B
concave and u = 2f
C
convex and u = f
D
concave and u = f
medium Difficulty
Verified Correct Answer: Option B
Physical Principles & Numerical Solution
-The image formed by a concave lens is always virtual, erect and magnified.
-The image formed by a concave mirror can be real or virtual, enlarged or diminished, and erect or inverted, depending upon the distance of the object from the mirror
Source: Myschool Past Questions Archive (Record #27842)